Membrane: Eight 4" x 40" TFC HF1 Membranes, For maximum rejection of impurities and high flow.
Membrane Housing: Eight 4" x 40" Champ Membrane Housing, Features a patented design and requires no tools for servicing.
Pump & Motor: One Gould's 3 HP Multistage Pump and Motor, 110 or 220 volts AC, 60 or 50 hertz, single phase, designed for continuous high pressures.
Frame: Aluminum, White powder coated, Corrosion resistant, and light weight.
Sediment Filter: One 18" FSI Bag 10 Micron Sediment Filter, Removes sediments and protects the system.
Sediment Filter: One 4.5" x 20" Big White 5 Micron Sediment Filter, Removes sediments and protects the system down to 5 micron.
Filter Housing: One 4.5" x 20" Big Grey Double O-Ring Filter Housings, Offers durability and improved sealing capabilities.
Pressure Gauges: Two 2.5" Gauge, 0-300 PSI, Panel Mount, Glycerin Filled, and Two 1.5" Gauges, 0-160 PSI, Top Mount Dry Gauge, For monitoring the system's operating pressure, the filter and carbon operating pressures.
Low Pressure Switch: One McCann's Low Pressure Switch Safety, Device to protect the pump from running dry when there is insufficient feed water pressure.
Solenoid Valve: One Solenoid Valve with Manual Override, 110 or 220 Volts AC, 60 or 50 Hertz, Assists with the on/off functionality of the system.
Manual Flush Valve: One 1/2" Stainless Steel Needle Valve, Regulates the product to waste ratio (systems recovery).
Computer Controller: One Rotrol S-150 Computer Controller, 220 volt with built-in TDS monitor, pre-treat lockout, tank full contacts, low pressure monitoring, and alarm.
Flow Meters: One Product (0-10 GPM) and One Waste (0-20 GPM) Flow Meters, Enables operator to accurately adjust product to waste ratio, and monitor systems performance.
Easy Maintenance & Operation: CRYSTAL QUEST® commercial reverse osmosis systems feature a compact design and have all of their components strategically located for easy access and inspection.
Optional Features -
Stainless Steel Housings: Eight 4” x 40” Puro Tech Stainless Steel Membrane Housings, 1/2” FNPT
High Pressure Switch: One Square D High Pressure Switch, Automatically starts when the tank pressure falls below 40 psi, and stops when the pressure reaches 60 psi.
Auto Flush: This feature will flush the systems membranes with the feed water, thus extending membrane life.
Float Switch: One Mechanical Float Switch, For atmospheric storage tank applications.
Concentrate Re-Circulate w/ 0-5 GPM Flow Meter: This feature offers a higher recovery rate for the system by taking a percentage of the waste water, and feeding it back into the system.
